How to program a 2001 lincoln ls key fob

You can purchase your new remote from the dealer if you need one then program them in the driveway at home when you are ready. Sit in the driver's seat and place the key into the ignition switch. Turn the key from the "Lock" positing to the "On" position. Turn the key back to the "Lock" position, repeating this eight times, ending in the "On" position after the eighth cycle.

The rest of transponder keys are for PATS Some Lincoln models can be programmed without any special machine. Those models are equipped with a security system called PATS1. Models that are equipped with security systems PATS require a special programming machine if all keys are lost. Therefore, if your car is equipped with a PATS1 system and you already have a cut key for any of these makes or models, you can program it yourself without calling a locksmith or tow the car to the dealer.

Here we will give detailed instructions on how to program a new key, what you should pay attention to, troubleshooting and useful tips that can save you a lot of money and time. Therefore, it is very important to make sure you have enough juice in the battery before starting the process. In case the battery dies during the process, the new master key will not program and you will have to start the procedure all over again.

While Lincoln models with a PATS1 system can be programmed with this method, we would recommend verifying the type of key with a locksmith or an additional reliable source that it is the right key.

You must have the right type of transponder key that matches your model and year. Otherwise, the key will not program. You can check the right key for the exact make and model here. The rest are used for PATS systems. No ifs, ands, or buts! Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do. Repeat immediately for any additional remotes to be programmed.

Turn ignition to OFF. Locks will again cycle to indicate end of programming mode. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same. Note: If your vehicle cannot enter programming mode, then you cannot program any remote. This indicates either no keyless entry installed on the vehicle or a defective keyless entry receiver module. If you have any difficulties with programming your vehicles, contact us at [email protected].